Home > Training Equipment > Wooden Dummies > Dummy Arms and Legs >

WOODEN DUMMY ARMS: MasterPath - Arm Set (3 Arms) - ASH (Made on Demand)
Wooden Dummy Arms (Set of 3) - ASH (Dual Parallel/Traditional Setting)

 
Click to View:


These jong arms are made to the specifications of the Ip Man lineage. The arms are handmade in the USA from the hardwood ASH. They go through our lamination process to ensure that they have "Maximum Strength". They're incredibly strong and are able to withstand a beating. The wood is not stained or varnished, so you can stain them to match the color of your dummy. Learn More >>
List Price: $124.99
Our Price: $109.99
You save $15.00!

Availability: Custom Made - see product description.
Product Code: MYJ-MP-ARMS02-SANDED-MOD

Choose Your Shipping Zone

USA (Continental 48) - $26
Canada (Lower Continental) - $50
Everywhere Else (PrePay $100 and we'll contact you with the exact cost OR email us now for a quote)
Choose Your Tenon Size (the arm insert)

Traditional/Level 1.5 x 1.5 inch
Thick 1.75 x 1.75 inch
1.5 inch wide x 1.875 high

Description
 
Wooden Dummy Arms (Set of 3) - ASH (Dual Level/Traditional Setting)
(aka Muk Yan Jong, or Mook Yan Jong ARMS)

These jong arms are made to the specifications of the Ip Man lineage. They are hand made in the USA.

The arms are made from the hardwood ASH. They go through our lamination process to ensure that they have "Maximum Strength". They're incredibly strong and are able to withstand a beating. The wood is not stained or varnished, so you can stain them to match the color of your dummy.

The top two arms are made with the tenon offset from the arm so that you can insert them one way to get the tips closer to level and insert them another way the tips will be in the more traditional setting (1-2 inches apart in height).

The only way to get level arms is to pick the 1.5 x 1.5 inch tenons and use close 1 5/8 x 1 5/8 arm mortises for your dummy.

This allows you a little variety in your training. The 3rd arm has the tenon set in the middle of the arm shaft.

3 pins are included for the arms. They are simple and have a black rubber right as the stopper.

The holes for the pins are NOT drilled - you will need to do this. The holes are based on the diameter of your dummy, so we can not pre-drill them for you.

Measurements:
Arm: Approx 12.5 inches
Tenon: Approx 12.5 inches long
Diameter large end of arm: 2.5 inches
Diameter small end of arm: 1.5 inches. The tips are rounded at the end.
Weight is about 2 lbs per arm.
Please allow 1/16th-inch tolerance on all measurements.

Custom:
If you want custom measurements, we can do that to a certain degree. We can change the length of the arm or tenon up to a max of 26" combined length (For example 14-inch arm and 12-inch tenon). Custom tenons sizes are also available, but please allow 1/16th-inch tolerance for all measurements. We will offset the tenon the normal distance for all tenon sizes. Please put your desired measurements in the order comments on the checkout page. If there are any issues with them we will contact you. Starting Aug 2016, there is a $15 charge for custom length orders. If you need a custom tenon size, that can be done free of charge.

Order and Shipping:
These arms are made on demand, and drop-ship from our carpenter in approx 3-5 weeks (it depends on workload and the current queue, you will get an email with the current wait time after you place your order.)