You are here: Home > Training Equipment > Butterfly Swords > "Stabber" Style Blades
These Wing Chun Butterfly Swords have a blade in the "Stabber" or "Straight Edge Stabber" style.

The Narrowing Stabber is mainly used for piercing opponents. The narrower blade and sharper tip facilitate this. These blades are good for stabbing and slicing, but sacrifice some chopping ability. You will notice that the top edge of the blade (the spine) is also angled downward. This give the sword more piercing power as the tip is in alignment with the handle and wrist. This is very similar to how they made the swords in the Red Boat (war) era of Wing Chun's history. These are lighter and faster than the choppers. Our 12" stabber was based on a historical triangular design rather than using one of the ugly modern rectangles that had no precedent in historical China (and are just a low cost manufacturing innovation).

The Straight-Edge Stabber is used by a few lineages. Instead of narrowing, the edge of the blade and spine run parallel to each other, until the end of the sword when the tip rounds up. Stabbing ability here is lost to gain a little chopping/blocking ability. This is more of a lineage specific design rather than a historical one, but one that is quiet popular.
Sort By:
1
[SOLD OUT!] - Wing Chun Butterfly Swords - Flagship Line - Stabber 12" Raindrop Damascus Blade Yuen Kay San Lineage Wing Chun Butterfly Swords (Sifu Series) - D2 Blunt Yuen Kay San Lineage Wing Chun Butterfly Swords (Sifu Series) - D2 Sharp
List Price $1,399.00
Our Price $749.00
Sale Price: $649.00
You save $750.00!
Out of Stock
List Price $800.00
Our Price $599.00
You save $201.00!
In Stock
List Price $825.00
Our Price $624.00
You save $201.00!
In Stock
Wing Chun Butterfly Swords - Flagship Line - Stabber 12" Raindrop Damascus Blade Yuen Kay San Lineage Wing Chun Butterfly Swords (Sifu Series) - Blunt in D2 Yuen Kay San Lineage Wing Chun Butterfly Swords (Sifu Series) - Sharp in D2
These swords are made from custom Raindrop Damascus.  These gorgeous blades are 5mm thick and sharp. The tang has an outside layer of stainless steel on the exposed edges so your hand does not touch the the carbon steel. The Yuen Kay San Butterfly Swords are a very limited edition collector's item (only 3 available to the general public) commissioned by Sifu Alton Miller.  They are beautiful and very comfortable 12" stabbers. The Yuen Kay San Butterfly Swords are a very limited edition collector's item (only 3 available to the general public) commissioned by Sifu Alton Miller. They are beautiful and very comfortable 12" stabbers. This model has a sharp edge and swage.
Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 11" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 12" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 13" D2 - Hollow Grind - Blunt
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 11" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 12" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 13" D2 - Hollow Grind - Blunt
These 2015 Flagship Line Wing Chun Butterfly Swords have black canvas micarta handles with mosaic pins and come with a 2-in-1 nylon-lined leather sheath. They are weapon-grade true-full-tang swords. The blade is a 11" Stabber style made from Austrian D2 tool steel with a wide hollow grind. This model is not sharpened. These 2015 Flagship Line Wing Chun Butterfly Swords have black canvas micarta handles with mosaic pins and come with a 2-in-1 nylon-lined leather sheath. They are weapon-grade true-full-tang swords. The blade is a 12" Stabber style made from Austrian D2 tool steel with a wide hollow grind. This model is not sharpened. These 2015 Flagship Line Wing Chun Butterfly Swords have black canvas micarta handles with mosaic pins and come with a 2-in-1 nylon-lined leather sheath. They are weapon-grade true-full-tang swords. The blade is a 13" Stabber style made from Austrian D2 tool steel with a wide hollow grind. This model is not sharpened.
Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 14" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v3 (2-in-1 Handles) - Stabber 11" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v3 (2-in-1 Handles) - Stabber 14" D2 - Hollow Grind - Blunt
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
List Price $1,099.00
Our Price $549.00
You save $550.00!
In Stock
List Price $1,099.00
Our Price $549.00
You save $550.00!
In Stock
Wing Chun Butterfly Swords - Flagship Line v2 - Stabber 14" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v3 (2-in-1 Handles) - Stabber 11" D2 - Hollow Grind - Blunt Wing Chun Butterfly Swords - Flagship Line v3 (2-in-1 Handles) - Stabber 14" D2 - Hollow Grind - Blunt
These 2015 Flagship Line Wing Chun Butterfly Swords have black canvas micarta handles with mosaic pins and come with a 2-in-1 nylon-lined leather sheath. They are weapon-grade true-full-tang swords. The blade is a 14" Stabber style made from Austrian D2 tool steel with a wide hollow grind. This model is not sharpened. These limited-edition 2015 Flagship Line Wing Chun butterfly swords have 2-in-1 black canvas micarta handles with mosaic pins and come with a 2-in-1 nylon-lined leather sheath. They are weapon-grade true-full-tang swords. The blade is a 11" Stabber style made from Austrian D2 tool steel with a wide hollow grind. This model is not sharpened. These limited-edition 2015 Flagship Line Wing Chun butterfly swords have 2-in-1 black canvas micarta handles with mosaic pins and come with a 2-in-1 nylon-lined leather sheath. They are weapon-grade true-full-tang swords. The blade is a 14" Stabber style made from Austrian D2 tool steel with a wide hollow grind. This model is not sharpened.
[SOLD OUT!] - Wing Chun Butterfly Swords - Flagship Line - Stabber 12" D2 Blade - Lenticular Grind Wing Chun Butterfly Swords - Flagship Line - Stabber 12" 440C Blade [SOLD OUT!] - Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - Tough-As-Hell - All Black - Sharp
List Price $999.00
Our Price $435.00
You save $564.00!
Out of Stock
List Price $999.00
Our Price $429.00
Sale Price: $379.00
You save $620.00!
In Stock
List Price $699.00
Our Price $425.00
Sale Price: $375.00
You save $324.00!
Out of Stock
Wing Chun Butterfly Swords - Flagship Line - Stabber 12" D2 Blade - Lenticular Grind Wing Chun Butterfly Swords - Flagship Line - Stabber 12" 440C Blade Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - Tough-As-Hell - All Black - Sharp
These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German D2 Tool Steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged. This model is not sharp. These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German 440C stainless with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. This model is not sharp. This model has black, Stabber style, hammered, 9260 combat steel blades.  (Sharp) "Tough-As-Hell" edition of the Tomb Warrior Line of 2-in-1 full tang swords.
[SOLD OUT!] - Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - Tough-As-Hell - All Black - Blunt [SOLD OUT!] - Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - D2 LG - Blunt Wing Chun Butterfly Swords - Domination Line - Stabber 12" 440C Blade
List Price $699.00
Our Price $399.00
You save $300.00!
Out of Stock
List Price $699.00
Our Price $399.00
Sale Price: $349.00
You save $350.00!
Out of Stock
List Price $999.00
Our Price $449.00
You save $550.00!
In Stock
Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - Tough-As-Hell - All Black - Blunt Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - D2 LG - Blunt Wing Chun Butterfly Swords - Domination Line - Stabber 12 440C Blade
This model has black, Stabber style, hammered, 9260 combat steel blades.  "Tough-As-Hell" edition of the Tomb Warrior Line of 2-in-1 full tang swords. This model has a D2 tool steel, Stabber style blade with a lenticular grind. Tomb Warrior Line of 2-in-1 full tang swords. The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 12" Stabber and is made in German 440C stainless steel with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged.
Wing Chun Butterfly Swords - Domination Line - Stabber 12" D2 Blade Wing Chun Butterfly Swords - Domination Line - Stabber 13" 440C Blade Wing Chun Butterfly Swords - Domination Line - Stabber 13" D2 Blade
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
List Price $999.00
Our Price $449.00
You save $550.00!
In Stock
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
Wing Chun Butterfly Swords - Domination Line - Stabber 12 D2 Blade Wing Chun Butterfly Swords - Domination Line - Stabber 13 440C Blade Wing Chun Butterfly Swords - Domination Line - Stabber 13 D2 Blade
The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 12" Stabber and is made in German D2 tool steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged. The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 13" Stabber and is made in German 440C stainless steel with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 13" Stabber and is made in German D2 tool steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged.
Wing Chun Butterfly Swords - Domination Line - Stabber 11" 440C Blade Wing Chun Butterfly Swords - Domination Line - Stabber 11" D2 Blade [SOLD OUT!] - Wing Chun Butterfly Swords - Domination Line - Stabber 14" D2 Blade
List Price $999.00
Our Price $449.00
You save $550.00!
In Stock
List Price $999.00
Our Price $499.00
You save $500.00!
In Stock
List Price $999.00
Our Price $499.00
You save $500.00!
Out of Stock
Wing Chun Butterfly Swords - Domination Line - Stabber 11 440C Blade Wing Chun Butterfly Swords - Domination Line - Stabber 11 D2 Blade Wing Chun Butterfly Swords - Domination Line - Stabber 14 D2 Blade
The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 11" Stabber and is made in German 440C stainless steel with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 11" Stabber and is made in German D2 tool steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged. The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 14" Stabber and is made in German D2 tool steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged.
[SOLD OUT!] - Wing Chun Butterfly Swords - Domination Line - Stabber 14" 440C Blade [SOLD OUT!] - Moy Yat Wing Chun Butterfly Swords - D2 Blade - Sharp [SOLD OUT!] - Butterfly Swords - Stabber 12" D2 Blade - Sharp Edge (Black Handle)
List Price $999.00
Our Price $449.00
You save $550.00!
Out of Stock
List Price $499.00
Our Price $349.00
Sale Price: $299.00
You save $200.00!
Out of Stock
List Price $299.00
Our Price $299.00
Out of Stock
Wing Chun Butterfly Swords - Domination Line - Stabber 14 440C Blade Moy Yat Wing Chun Butterfly Swords - D2 Blade - Sharp Butterfly Swords - Stabber 12" D2 Sharp - Black
The DOMINATION line of Wing Chun butterfly swords are weapon-grade, true full-tang swords. This Model: Blade is a 14" Stabber and is made in German 440C stainless steel with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. These are custom swords made for the Moy Yat lineage based off Moy Yat's swords. D2 is a heavy duty steel for all your hard-core training needs. This pair is sharp. This is a pair of custom designed Butterfly Swords, made by hand. They are Wing Chun bart jarm dao with a full tang 12 inch blades made from D2 tool steel that feature a wide hollow-grinds and functional fullers. These knives are designed for lineages that stab as well as chop and slice. You can flip these swords into reverse grip as well as trap opponent's weapons.
[SOLD OUT!] - Butterfly Swords - Stabber 12" D2 Blade - Blunt Edge (Black Handle) [SOLD OUT!] - Butterfly Swords - Stabber 12" D2 Blade - Blunt Edge (Brown Handle) [SOLD OUT!] - Butterfly Swords - Stabber 12" D2 Blade - Sharp Edge (Brown Handle)
List Price $299.00
Our Price $299.00
Out of Stock
List Price $299.00
Our Price $299.00
Out of Stock
List Price $299.00
Our Price $299.00
Out of Stock
Butterfly Swords - Stabber 12" D2 Blunt - Black Butterfly Swords - Stabber 12" D2 Blunt - Brown Butterfly Swords - Stabber 12" D2 Sharp - Brown
This is a pair of custom designed Butterfly Swords, made by hand. They are Wing Chun bart jarm dao with a full tang 12 inch blades made from D2 tool steel that feature a wide hollow-grinds and functional fullers. These knives are designed for lineages that stab as well as chop and slice. You can flip these swords into reverse grip as well as trap opponent's weapons. This is a pair of custom designed Butterfly Swords, made by hand. They are Wing Chun bart jarm dao with a full tang 12 inch blades made from D2 tool steel that feature a wide hollow-grinds and functional fullers. These knives are designed for lineages that stab as well as chop and slice. You can flip these swords into reverse grip as well as trap opponent's weapons. This is a pair of custom designed Butterfly Swords, made by hand. They are Wing Chun bart jarm dao with a full tang 12 inch blades made from D2 tool steel that feature a wide hollow-grinds and functional fullers. These knives are designed for lineages that stab as well as chop and slice. You can flip these swords into reverse grip as well as trap opponent's weapons.
[SOLD OUT!] - Butterfly Swords - Stabber 12" D2 Blade - Sharp Edge (Black/Red Handle) [SOLD OUT!] - Butterfly Swords - Stabber 12" D2 Blade - Blunt Edge (Black/Red Handle) [SOLD OUT!] - Wing Chun Butterfly Swords - Flagship Line - 12" D2 Blade - Lenticular Grind
List Price $299.00
Our Price $299.00
Out of Stock
List Price $299.00
Our Price $299.00
Out of Stock
List Price $899.00
Our Price $435.00
You save $464.00!
Out of Stock
Butterfly Swords - Stabber 12" D2 Sharp - Black/Red Butterfly Swords - Stabber 12" D2 Blunt - Black/Red Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" D2 Blade
This is a pair of custom designed Butterfly Swords, made by hand. They are Wing Chun bart jarm dao with a full tang 12 inch blades made from D2 tool steel that feature a wide hollow-grinds and functional fullers. These knives are designed for lineages that stab as well as chop and slice. You can flip these swords into reverse grip as well as trap opponent's weapons. This is a pair of custom designed Butterfly Swords, made by hand. They are Wing Chun bart jarm dao with a full tang 12 inch blades made from D2 tool steel that feature a wide hollow-grinds and functional fullers. These knives are designed for lineages that stab as well as chop and slice. You can flip these swords into reverse grip as well as trap opponent's weapons. These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German D2 Tool Steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged. This model is not sharp. The current picture is of the prototype 440C hollow grind blade. D2 blades and final product will be slightly different.
[SOLD OUT!] - Moy Yat Wing Chun Butterfly Swords - 440B Blade [SOLD OUT!] - Butterfly Swords - Long Stabber 14.5" Blade (Brown handle) [SOLD OUT!] - Butterfly Swords - Long Stabber 14.5" Blade (Red/Black handle)
List Price $499.00
Our Price $299.00
Sale Price: $249.00
You save $250.00!
Out of Stock
List Price $299.00
Our Price $299.00
Last Chance Sale Price $239.00
You save $60.00!
Out of Stock
List Price $299.00
Our Price $299.00
Last Chance Sale Price $239.00
You save $60.00!
Out of Stock
Moy Yat Wing Chun Butterfly Swords - 440B Blade Butterfly Swords - Long Stabber 14.5" Blade Butterfly Swords - Long Stabber 14.5" Blade
These are custom swords made for the Moy Yat lineage based off Moy Yat's swords. 440B is a stainless steel that is good for maintenance and training forms. This pair is not sharp. These were designed by Modell Design LLC to the specifications of a Michigan William Cheung lineage Sifu who wanted to capture the feel of a pair of expensive full custom knives.  They are outstanding ultra-fast stabbers for outside measure Wing Chun professionals.  Our supply is from the first run, made from Bohler 440C weapons grade stainless steel polished to a see yourself glossy finish. These were designed by Modell Design LLC to the specifications of a Michigan William Cheung lineage Sifu who wanted to capture the feel of a pair of expensive full custom knives.  They are outstanding ultra-fast stabbers for outside measure Wing Chun professionals.  Our supply is from the first run, made from Bohler 440C weapons grade stainless steel polished to a see yourself glossy finish.
[SOLD OUT!] - Moy Yat Wing Chun Butterfly Swords - 440B Blade - Sharp [SOLD OUT!] - Moy Yat Wing Chun Butterfly Swords - D2 Blade [SOLD OUT!] - Wing Chun Butterfly Swords - Tough-As-Hell - Stabber 12" Blade - Gold Plated Guard - Sharp
List Price $499.00
Our Price $299.00
Sale Price $274.00
You save $225.00!
Out of Stock
List Price $499.00
Our Price $349.00
Sale Price $274.00
You save $225.00!
Out of Stock
List Price $799.00
Our Price $499.00
Discount Price $299.00
You save $500.00!
Out of Stock
Moy Yat Wing Chun Butterfly Swords - 440B Blade - Sharp Moy Yat Wing Chun Butterfly Swords - D2 Blade Wing Chun Butterfly Swords - Flagship Line, Tough-As-Hell Edition - Stabber 12" Blade - Gold Plated Guard - Sharp
These are custom swords made for the Moy Yat lineage based off Moy Yat's swords. 440B is a stainless steel that is good for maintenance and training forms. This pair is sharp. These are custom swords made for the Moy Yat lineage based off Moy Yat's swords. D2 is a heavy duty steel for all your hard-core training needs. This pair is not sharp. This model has a gold plated D-Guard and black Stabber style, hammered, 9260 combat steel blades. (Sharp)  "Tough-As-Hell" edition of the Flagship Line of weapon-grade training swords.
[SOLD OUT!] - Wing Chun Butterfly Swords - Tough-As-Hell - Stabber 12" Blade - All Black - Sharp [SOLD OUT!] - Wing Chun Butterfly Swords - Flagship Line - 12" 440C Blade [SOLD OUT!] - Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - 440C LG - Blunt
List Price $799.00
Our Price $399.00
Sale Price: $349.00
You save $450.00!
Out of Stock
List Price $899.00
Our Price $399.00
You save $500.00!
Out of Stock
List Price $699.00
Our Price $374.00
You save $325.00!
Out of Stock
Wing Chun Butterfly Swords - Flagship Line, Tough-As-Hell Edition - Stabber 12" Blade - All Black - Sharp Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" 440C Blade Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - 440C LG - Blunt
This model has a black D-Guard and black Stabber style, hammered, 9260 combat steel blades. (Sharp)  "Tough-As-Hell" edition of the Flagship Line of weapon-grade training swords. These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German 440C stainless with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. This model is not sharp. The current picture is of the prototype 440C hollow grind blade. D2 blades and final product will be slightly different. This model has a 440C stainless steel steel, Stabber style blade with a lenticular grind. Tomb Warrior Line of 2-in-1 full tang swords.
[SOLD OUT!] - Wing Chun Butterfly Swords - Handmade Heavy Duty Training - Stabbing Style [SOLD OUT!] - Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - D2 LG - Sharp [SOLD OUT!] - Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - 440C HG - Sharp
List Price $299.99
Our Price $249.99
You save $50.00!
Out of Stock
List Price $699.00
Our Price $399.00
You save $300.00!
Out of Stock
List Price $574.00
Our Price $299.00
You save $275.00!
Out of Stock
Wing Chun Butterfly Swords - Handmade Heavy Duty Training - Stabbing Style Wing Chun Butterfly Swords - Tomb Warrior Line - Stabber 11.5" Blade - D2 LG - Sharp Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - 440C HG - Sharp
These new handmade hardcore training swords from Everything Wing Chun are awesome. They look good, feel great, and are an absolute steal for the price and come in a sword carrying case.FREE Shipping! This model has a D2 tool steel, Stabber style blade with a lenticular grind. (Sharp) Tomb Warrior Line of 2-in-1 full tang swords. This model has a 440C stainless steel, Stabber style blade with a hollow grind. (Sharp) Premium Line of straight-handled full hidden tang swords.
[SOLD OUT!] - Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - 440C LG - Blunt [SOLD OUT!] - Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - Tough-As-Hell - All Black - Sharp [SOLD OUT!] - Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - D2 HG - Sharp
List Price $549.00
Our Price $249.00
You save $300.00!
Out of Stock
List Price $599.00
Our Price $299.00
You save $300.00!
Out of Stock
List Price $599.00
Our Price $299.00
You save $300.00!
Out of Stock
Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - 440C LG - Blunt Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - Tough-As-Hell - All Black - Sharp Wing Chun Butterfly Swords - Premium Line - Stabber 12" Blade - D2 HG -  Sharp
This model has a 440C stainless steel, Stabber style blade with a lenticular grind. Premium Line of straight-handled full hidden tang swords. This model has a silver D-Guard and black Stabber style, hammered, 9260 combat steel blades. (Sharp)  "Tough-As-Hell" edition of the Premium Line of weapon-grade training swords. This model has a D2 tool steel, Stabber style blade with a hollow grind. (Sharp) Premium Line of straight-handled full hidden tang swords.
[SOLD OUT!] - Wing Chun Butterfly Swords - Tough-As-Hell - Stabber 12" Blade - Silver Guard - Sharp [SOLD OUT!] - Wing Chun Butterfly Swords - Premium Line Training - Stabber 12" Blade - D2 - BLUNT [SOLD!] - Yuen Kay San Lineage Wing Chun Butterfly Swords (Sifu Series) MASTER
List Price $799.00
Our Price $424.00
You save $375.00!
Out of Stock
List Price $599.00
Our Price $299.00
You save $300.00!
Out of Stock
List Price $800.00
Our Price $800.00
Out of Stock
Wing Chun Butterfly Swords - Flagship Line, Tough-As-Hell Edition - Stabber 12" Blade - Silver Guard - Sharp Wing Chun Butterfly Swords - Premium Line Training - Stabber 12" Blade - D2 - BLUNT Yuen Kay San Lineage Wing Chun Butterfly Swords (Sifu Series)
This model has a silver D-Guard and black Stabber style, hammered, 9260 combat steel blades. (Sharp)  "Tough-As-Hell" edition of the Flagship Line of weapon-grade training swords. These premium line swords are made for hard training.  They are blunt D2
tool steel with a 3mm edge and a slightly rounded tip (for safety). Stabber-style blade.
The Yuen Kay San Butterfly Swords are a very limited edition collector's item (only 5 available to the general public) commissioned by Sifu Alton Miller.  They are beautiful and very comfortable 12" stabbers.
Wing Chun Butterfly Swords - Stabber 12" 440C Blade - Sharp [SOLD OUT] - Wing Chun Butterfly Swords - Tough-As-Hell - Stabber 12" Blade - All Black - Blunt Wing Chun Butterfly Swords - Tough-As-Hell - Stabber 12" Blade - Silver Guard - Blunt
List Price $999.00
Our Price $449.00
Sale Price: $399.00
You save $600.00!
In Stock
List Price $799.00
Our Price $399.00
Sale Price: $349.00
You save $450.00!
Out of Stock
List Price $799.00
Our Price $399.00
Sale Price: $349.00
You save $450.00!
In Stock
Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" 440C Blade - Sharp Wing Chun Butterfly Swords - Flagship Line, Tough-As-Hell Edition - Stabber 12" Blade - All Black - Blunt Wing Chun Butterfly Swords - Flagship Line, Tough-As-Hell Edition - Stabber 12" Blade - Silver Guard - Blunt
These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German 440C stainless with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. This model is sharp. This model has a black D-Guard and black Stabber style, hammered, 9260 combat steel blades.  "Tough-As-Hell" edition of the Flagship Line of weapon-grade training swords. This model has a silver D-Guard and black Stabber style, hammered, 9260 combat steel blades. "Tough-As-Hell" edition of the Flagship Line of weapon-grade training swords.
[SOLD OUT!] - Wing Chun Butterfly Swords - Stabber 12" D2 Blade - Sharp Hollow Grind Wing Chun Butterfly Swords - Stabber 12" D2 Blade - Sharp Lenticular Grind Wing Chun Butterfly Swords - Stabber 12" D2 Blade - Sharp Lenticular Grind - HALF Handles
List Price $999.00
Our Price $475.00
Sale Price: $425.00
You save $574.00!
Out of Stock
List Price $999.00
Our Price $475.00
Sale Price: $425.00
You save $574.00!
In Stock
List Price $999.00
Our Price $499.00
Sale Price: $399.00
You save $600.00!
In Stock
Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" D2 Blade - Sharp Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" D2 Blade - Sharp Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" D2 Blade - Sharp - Half-Handles
These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German D2 Tool Steel with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. This model is sharp. These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German D2 Tool Steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged. This model is sharp. The current picture is of the prototype 440C hollow grind blade. D2 blades and final product will be slightly different. These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German D2 Tool Steel with a lenticular grind. D-Guard is AISI 304 stainless hot drop forged. This model is sharp. This is a unique model of which only one was made.  The handles are 1/2
handles so that the swords fit together better and can be held in one
hand more easily.  The pictures are of the full-handled model, not this
particular model.
[SOLD OUT!] - Wing Chun Butterfly Swords - Flagship Line - 12" D2 Blade - Blunt Hollow Grind [SOLD OUT!] - Tim Lee Historical Stabber Wing Chun Butterfly Swords (Sifu Series) (Blunt) [SOLD OUT!] - Tim Lee Historical Stabber Wing Chun Butterfly Swords (Sifu Series) (Sharp)
List Price $999.00
Our Price $435.00
You save $564.00!
Out of Stock
List Price $800.00
Our Price $499.00
You save $301.00!
Out of Stock
List Price $800.00
Our Price $499.00
You save $301.00!
Out of Stock
Ultimate Wing Chun Butterfly Swords - Full Tang Flagship Line - Stabber 12" D2 Blade - Blunt Tim Lee Historical Stabber Wing Chun Butterfly Swords (Collector's Series) Tim Lee Historical Stabber Wing Chun Butterfly Swords (Collector's Series)
These are weapon grade true full tang swords. Blade is a 12" stabber and is made in German D2 Tool Steel with a wide hollow grind. D-Guard is AISI 304 stainless hot drop forged. This model is Blunt. These Sifu Tim Lee Butterfly Swords are a very limited 1st edition collector's item (only 3 available) and modeled on a Historical war-era butterfly sword. They are heavy-duty and very comfortable 12" stabbers in D2 with a flipping and trapping quillon. These Sifu Tim Lee Butterfly Swords are a very limited 1st edition collector's item (only 3 available) and modeled on a Historical war-era butterfly sword. They are heavy-duty and very comfortable 12" stabbers in D2 with a flipping and trapping quillon. This model is sharp.
   
 
1